Ruijie Reyee RG-AWG0.5-2SM-305I

Specifications

• Packaging

Distributed in industrial spools containing a total length of 305 meters (1,000 ft).

• Jacket Profile

Compact flat profile built for neat track routing across interior walls, vertical risers, and baseboards.

• Fiber Core Type

G.657A2 bend-insensitive, single-mode silica fiber.

• Crush Resistance

1,000 N per 100 mm (Short term structural load).

• Cable Architecture

Optoelectronic Hybrid layout carrying 2-core copper wires and 2-core optical fibers simultaneously.

• Copper Conductor Gauge

Multi-strand flexible copper conductors with a cross-sectional area of 0.5 mm² (providing enhanced power carriage).

• Rated Operating Voltage

Maximum threshold up to 150V.

• Environmental Protections

RoHS 2.0 eco-compliant profile built for an expected operational lifespan of ≥ 15 years.

• Maximum Copper Resistance

39 Ω/km (compared to the 92.3 Ω/km found on the 0.2 mm² wire, this lower resistance mitigates power degradation over extended distances).

• Operating Temperature Limits

Rated for safe utility from -20 °C to 70 °C.

• Flame Retardancy Certification

Evaluated and approved under GB/T 18380.12 structural safety criteria.

• Optical Attenuation Parameters

• Insulation Resistance Threshold

≥ 0.013 MΩ·km.

• To Ceiling APs (RG-APF2260(MG))

Max drop up to 300 meters

• Mechanical Tensile Load Capacity

200 N (Short term) / 100 N (Long term).

• To Wall-Plate APs (RG-APF1260(MG-P))

Max drop up to 360 meters with pass-through PoE-Out disabled; max drop up to 200 meters if the AP is actively powering an IP phone via its PoE-Out port.

When connected to an active optical splitter (such as the Ruijie Reyee RG-SPL2032-SC-P allocating 30W PoF power per downstream link), the thicker 0.5 mm² copper cores unlock the following structural distances